Shop cleaning

Moderator: admin

User avatar
dusty
Platinum Member
Posts: 21530
Joined: Wed Nov 22, 2006 6:52 am
Location: Tucson (Wildcat Country), Arizona

Shop Cleaning

Post by dusty »

They don't do much for cleaning the shop but when they are around I don't have problems with spiders.

[ATTACH]11244[/ATTACH]

[ATTACH]11245[/ATTACH]

[ATTACH]11246[/ATTACH]
Attachments
P7300015 (Small).JPG
P7300015 (Small).JPG (51.5 KiB) Viewed 1598 times
Shop Tarantula.JPG
Shop Tarantula.JPG (135 KiB) Viewed 1600 times
Tarantula's Brother.JPG
Tarantula's Brother.JPG (152.86 KiB) Viewed 1599 times
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

dusty wrote:They don't do much for cleaning the shop but when they are around I don't have problems with spiders.

[ATTACH]11244[/ATTACH]

[ATTACH]11245[/ATTACH]

[ATTACH]11246[/ATTACH]

Uhhhh . . . Dusty? . . . . . . . . Ain't spiders gots 8 legs?:rolleyes:
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
fjimp
Platinum Member
Posts: 2345
Joined: Wed Jul 19, 2006 8:45 pm
Location: Lakewood, Colorado

Post by fjimp »

JPG40504 wrote:Uhhhh . . . Dusty? . . . . . . . . Ain't spiders gots 8 legs?:rolleyes:
Unless I am confused Dusty is not picturing spiders here. Jim
F. Jim Parks
Lakewood, Colorado:)

When the love of power is replaced by the power of love the world will have a chance for survival.
User avatar
joedw00
Platinum Member
Posts: 1957
Joined: Thu Jul 20, 2006 7:01 pm
Location: Wichita, Kansas

Post by joedw00 »

I think I will put up with a few cobwebs, and not that thing. :eek: :eek: :eek: :eek:
Joe

520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500

Being a VETERAN is an honor
Being a GRANDPA is priceless
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

fjimp wrote:Unless I am confused Dusty is not picturing spiders here. Jim

A tarantula is NOT a spider????:confused: It IS an arachnid! Ain't THAT a spider???:D

In any event, Dusty can have them ALL!
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
beeg
Platinum Member
Posts: 4790
Joined: Sun Oct 14, 2007 2:33 pm
Location: St. Louis,Mo.

Post by beeg »

Cobweb webs wood be easier to clean up than MUD, like some of our friends in Calf. might have to do.
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.

Bob
wgander
Gold Member
Posts: 179
Joined: Sun Mar 02, 2008 2:35 pm
Location: San Diego, CA/Kittanning, PA
Contact:

pests

Post by wgander »

My shop is in western PA and I don't have a spider problem. I did have a lot of yellow jackets in the past, only a few last summer. I think I finally was lucky enough to spray their entrance. They would hang around the corners and I think they were getting in just under the roof.
It's a 400 square foot, stand alone wood building with a pitched roof. It had been unused for about 5 years, and I did my best to dust and vacuum all around the edges and eaves when I first started using it. There were several yellow jacket/wasp nests up there.
User avatar
dusty
Platinum Member
Posts: 21530
Joined: Wed Nov 22, 2006 6:52 am
Location: Tucson (Wildcat Country), Arizona

Post by dusty »

JPG40504 wrote:Uhhhh . . . Dusty? . . . . . . . . Ain't spiders gots 8 legs?:rolleyes:
Yes, I suppose there is some basis to argue that tarantulas are spiders. But even if they are, I consider them protected. I am thankful, each year, when I see evidence that they are again returning.

Many of the critters that were native to this area are slowly disappearing.

When I moved into my house, I was way, way out of town. Now the town has moved way, way beyond me. This residential movement is driving the critters away.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
User avatar
robinson46176
Platinum Member
Posts: 4182
Joined: Mon Mar 09, 2009 9:00 pm
Location: Central Indiana (Shelbyville)

Post by robinson46176 »

dusty wrote:Yes, I suppose there is some basis to argue that tarantulas are spiders. But even if they are, I consider them protected. I am thankful, each year, when I see evidence that they are again returning.

Many of the critters that were native to this area are slowly disappearing.

When I moved into my house, I was way, way out of town. Now the town has moved way, way beyond me. This residential movement is driving the critters away.


When my folks bought the base part of this farm in 1951 we were 3 miles out of town. Now the north west corner of my farm is less than a half mile from the city limits. Once rented fields across the road that I worked until about 1960 are now all houses. Thankfully the ones closest to me are quite nice multi-story homes on 8 to 12 acre lots. The large lots help reduce the impact. Still, it is now a different world. I maintain several small wooded areas, a small pond, a creek and keep building small brush piles etc. to help keep a lot of wildlife here. I would like to reduce the coyote and raccoon population a little. Everything else is encouraged or tolerated (including "outdoor" spiders). :) From the look of the tracks in the fresh snows we must have 3 or 4 million rabbits. :D
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
User avatar
Ed in Tampa
Platinum Member
Posts: 5834
Joined: Fri Jul 21, 2006 12:45 am
Location: North Tampa Bay area Florida

Post by Ed in Tampa »

fjimp wrote:Unless I am confused Dusty is not picturing spiders here. Jim

They look like spiders to me. If they aren't spiders what are they?
Ed in Tampa
Stay out of trouble!
Post Reply