Shop cleaning
Moderator: admin
- dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
Shop Cleaning
They don't do much for cleaning the shop but when they are around I don't have problems with spiders.
[ATTACH]11244[/ATTACH]
[ATTACH]11245[/ATTACH]
[ATTACH]11246[/ATTACH]
[ATTACH]11244[/ATTACH]
[ATTACH]11245[/ATTACH]
[ATTACH]11246[/ATTACH]
- Attachments
-
- P7300015 (Small).JPG (51.5 KiB) Viewed 1599 times
-
- Shop Tarantula.JPG (135 KiB) Viewed 1601 times
-
- Tarantula's Brother.JPG (152.86 KiB) Viewed 1600 times
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
dusty wrote:They don't do much for cleaning the shop but when they are around I don't have problems with spiders.
[ATTACH]11244[/ATTACH]
[ATTACH]11245[/ATTACH]
[ATTACH]11246[/ATTACH]
Uhhhh . . . Dusty? . . . . . . . . Ain't spiders gots 8 legs?:rolleyes:
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
fjimp wrote:Unless I am confused Dusty is not picturing spiders here. Jim
A tarantula is NOT a spider????
In any event, Dusty can have them ALL!
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Cobweb webs wood be easier to clean up than MUD, like some of our friends in Calf. might have to do.
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob
-
wgander
- Gold Member
- Posts: 179
- Joined: Sun Mar 02, 2008 2:35 pm
- Location: San Diego, CA/Kittanning, PA
- Contact:
pests
My shop is in western PA and I don't have a spider problem. I did have a lot of yellow jackets in the past, only a few last summer. I think I finally was lucky enough to spray their entrance. They would hang around the corners and I think they were getting in just under the roof.
It's a 400 square foot, stand alone wood building with a pitched roof. It had been unused for about 5 years, and I did my best to dust and vacuum all around the edges and eaves when I first started using it. There were several yellow jacket/wasp nests up there.
It's a 400 square foot, stand alone wood building with a pitched roof. It had been unused for about 5 years, and I did my best to dust and vacuum all around the edges and eaves when I first started using it. There were several yellow jacket/wasp nests up there.
- dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
Yes, I suppose there is some basis to argue that tarantulas are spiders. But even if they are, I consider them protected. I am thankful, each year, when I see evidence that they are again returning.JPG40504 wrote:Uhhhh . . . Dusty? . . . . . . . . Ain't spiders gots 8 legs?:rolleyes:
Many of the critters that were native to this area are slowly disappearing.
When I moved into my house, I was way, way out of town. Now the town has moved way, way beyond me. This residential movement is driving the critters away.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
- robinson46176
- Platinum Member
- Posts: 4182
- Joined: Mon Mar 09, 2009 9:00 pm
- Location: Central Indiana (Shelbyville)
dusty wrote:Yes, I suppose there is some basis to argue that tarantulas are spiders. But even if they are, I consider them protected. I am thankful, each year, when I see evidence that they are again returning.
Many of the critters that were native to this area are slowly disappearing.
When I moved into my house, I was way, way out of town. Now the town has moved way, way beyond me. This residential movement is driving the critters away.
When my folks bought the base part of this farm in 1951 we were 3 miles out of town. Now the north west corner of my farm is less than a half mile from the city limits. Once rented fields across the road that I worked until about 1960 are now all houses. Thankfully the ones closest to me are quite nice multi-story homes on 8 to 12 acre lots. The large lots help reduce the impact. Still, it is now a different world. I maintain several small wooded areas, a small pond, a creek and keep building small brush piles etc. to help keep a lot of wildlife here. I would like to reduce the coyote and raccoon population a little. Everything else is encouraged or tolerated (including "outdoor" spiders).
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
- Ed in Tampa
- Platinum Member
- Posts: 5834
- Joined: Fri Jul 21, 2006 12:45 am
- Location: North Tampa Bay area Florida