lubricateing sheaves
Moderator: admin
-
tedinarkansas
- Bronze Member
- Posts: 2
- Joined: Sun Feb 05, 2012 2:07 pm
lubricateing sheaves
The book says to use non detergent oil to lubricate the sheathes, I hate to buy a quart of oil to use 4 drops. Does everyone use that? I have some rem. oil (gun oil) would that work? Thanks in advance for the help.
Ted:)
Ted:)
- terrydowning
- Platinum Member
- Posts: 1678
- Joined: Mon Jul 19, 2010 3:26 pm
- Location: Windsor, CO
Google "zoom spout turbine oil" to find a 4 oz bottle with a 14" extending tube that makes oiling the Shopsmith headstock a very easy job. This was what Shopsmith was using for the headstocks in July 2008 at the factory. I do not recommend using any engine or motor oil as it causes the control sheave to stick on the idler shaft resulting in damage to internal parts.
Bill Mayo bill.mayo@verizon.net
Shopsmith owner since 73. Sell, repair and rebuild Shopsmith, Total Shop & Wood Master headstocks, SPTs, attachments, accessories and parts. US Navy 1955-1975 (FTCS/E-8)
Shopsmith owner since 73. Sell, repair and rebuild Shopsmith, Total Shop & Wood Master headstocks, SPTs, attachments, accessories and parts. US Navy 1955-1975 (FTCS/E-8)
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Also sewing machine oil, electric fan oil, etc. Including those mentioned above, all are low viscosity machine oil.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
picture of zoom spout oiler
What Bill Mayo is talking about. works very slick. get at ACE hdwe.[ATTACH]18718[/ATTACH]
[ATTACH]18719[/ATTACH]
[ATTACH]18719[/ATTACH]
- Attachments
-
- IMG_2566.JPG (80.24 KiB) Viewed 2198 times
-
- IMG_2567.JPG (86.07 KiB) Viewed 2198 times
-
tedinarkansas
- Bronze Member
- Posts: 2
- Joined: Sun Feb 05, 2012 2:07 pm
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
I do not suppose it contained sewing machine oil!:Dfjimp wrote:I recently found the Zoom Spout Oiler at Joann's Fabric store in our city.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
fjimp wrote:Actually that is what my bride uses on her expensive Bernina quilting machines. Jim
Same here, Jim! We use Zoom Spout on my wife's embroidery machine. Over 300 million stitches so far. I was amazed when last servicing her machine. The machine counts the stitches made. It was surprising to see such a large number. Still stitching like a champ!:D
Same oil I used on my Mark V with excellent results.
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
Chuck in Lancaster, CA