otabe wrote:Hi, My dad has an old Shopsmith Model 10E that I am trying to get up to snuff and it has a table saw that turns at a very slow crawl that I'd like to fix. I don't know if the parts are old or if I need to adjust something.
Thanks if you can help.
Ok. first the saw blade should be mounted on an arbor, not in the drill chuck.
Ron, Keith Rucker says THANK YOU!
(Keith owns the Vintage Machinery site.)
steve
And I to him, VintageMachinery.com is a valuable resource.
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
I would refer to that as a Monkey Wards Power Kraft "CLONE".
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
otabe wrote:Hi, My dad has an old Shopsmith Model 10E that I am trying to get up to snuff and it has a table saw that turns at a very slow crawl that I'd like to fix. I don't know if the parts are old or if I need to adjust something.
Thanks if you can help.
OK, looking at this picture, the speedchanger is set
to slow. Look at the belts. Belt from the motor
pulley is "small at the speedchanger," and the upper
belt is large at the speed changer. Both decrease
tool speed.
Crank the speedchanger knob. But, NEVER without
the belts moving. If not powered, put your sanding
disc, and rotate while moving the speedchanger crank.
steve
10 ER, stripped down.
Basic 10ER, Parts machine. Will be a semi-dedicated drill-press machine.
10 ER, a "survivor" of the trailer fire, in the back yard, needing restoration. Has a Mk5 headrest. Finally, stripped down.
Numerous parts, for Model 10 stuff. Except for lower saw guard, A and B adapters, I've got it.
Looking for one more, or some 9 inch extension table raisers.
VintageMachinery.com is a valuable resource.
