Glue to attach Planer Stainless Steel Clad to Aluminum Casting

Forum for Maintenance and Repair topics. Feel free to ask questions or contribute.

Moderator: admin

Post Reply
GetterDone
Gold Member
Posts: 358
Joined: Sat Jul 20, 2024 3:45 pm
Location: TN

Re: Glue to attach Planer Stainless Steel Clad to Aluminum Casting

Post by GetterDone »

JPG wrote: ↑Sun Sep 22, 2024 12:54 pm Missed that! :o

Wonder how the new piece will be formed over the ends. If not very strong adhesion is required.

Me thinks I would replace it with a sheet of hdpe(slick)
That a great Idea. :D

I have yet to check the condition of the one I acquired about a month ago. :)
Dwayne

1st Shopsmith Machine= SS Mark V /Jan./1984
2nd Shopsmith Machine= SS Mark V / Mar./1984
3rd Shopsmith Machine= SS Mark V / Jan./1981
4th Shopsmith Machine = SS Mark V (510) 50th anniversary
5th Shopsmith Machine = SS Mark V (510) Dec. 1996
6th Shopsmith Machine = SS Mark VII (1963 ???)
7th Shopsmith Machine = SS Mark V / Nov. 1984 (Double Quill Bearings)
8th Shopsmith Machine = SS Greenie / 1956
Shopsmith headstock only/ From Shopsmith/ June 1957
Top
User avatar
JPG
Platinum Member
Posts: 35430
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: Glue to attach Planer Stainless Steel Clad to Aluminum Casting

Post by JPG »

GetterDone wrote: ↑Sun Sep 22, 2024 5:25 pm
JPG wrote: ↑Sun Sep 22, 2024 12:54 pm Missed that! :o

Wonder how the new piece will be formed over the ends. If not very strong adhesion is required.

Me thinks I would replace it with a sheet of hdpe(slick)
That a great Idea. :D

I have yet to check the condition of the one I acquired about a month ago. :)
If it ain't broke, don't fix it! ;)
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
GetterDone
Gold Member
Posts: 358
Joined: Sat Jul 20, 2024 3:45 pm
Location: TN

Re: Glue to attach Planer Stainless Steel Clad to Aluminum Casting

Post by GetterDone »

JPG wrote: ↑Mon Sep 23, 2024 10:01 am
GetterDone wrote: ↑Sun Sep 22, 2024 5:25 pm
JPG wrote: ↑Sun Sep 22, 2024 12:54 pm Missed that! :o

Wonder how the new piece will be formed over the ends. If not very strong adhesion is required.

Me thinks I would replace it with a sheet of hdpe(slick)
That a great Idea. :D

I have yet to check the condition of the one I acquired about a month ago. :)
If it ain't broke, don't fix it! ;)
For sure. :) I bought a bunch of stuff with it and did not even look at . :eek:
I hope it is okay. :D
Dwayne

1st Shopsmith Machine= SS Mark V /Jan./1984
2nd Shopsmith Machine= SS Mark V / Mar./1984
3rd Shopsmith Machine= SS Mark V / Jan./1981
4th Shopsmith Machine = SS Mark V (510) 50th anniversary
5th Shopsmith Machine = SS Mark V (510) Dec. 1996
6th Shopsmith Machine = SS Mark VII (1963 ???)
7th Shopsmith Machine = SS Mark V / Nov. 1984 (Double Quill Bearings)
8th Shopsmith Machine = SS Greenie / 1956
Shopsmith headstock only/ From Shopsmith/ June 1957
Top
edma194
Platinum Member
Posts: 2206
Joined: Fri Jun 19, 2020 4:08 pm

Re: Glue to attach Planer Stainless Steel Clad to Aluminum Casting

Post by edma194 »

HDPE would be a great surface for the planer bed. Very slippery. But also very difficult to glue it to the aluminum casting ;)

Actually silicone would work very well to hold it down. It can be thinned to spread a light coat. If it can be wrapped over the ends of the casting it could be held down with screws there. If it gets scratched up it will be easy to peel off with the aid of some solvent.
Ed from Rhode Island

510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
Top
User avatar
jsburger
Platinum Member
Posts: 6551
Joined: Fri Jul 21, 2006 4:06 pm
Location: Hooper, UT

Re: Glue to attach Planer Stainless Steel Clad to Aluminum Casting

Post by jsburger »

edma194 wrote: ↑Mon Sep 23, 2024 1:39 pm HDPE would be a great surface for the planer bed. Very slippery. But also very difficult to glue it to the aluminum casting ;)

Actually silicone would work very well to hold it down. It can be thinned to spread a light coat. If it can be wrapped over the ends of the casting it could be held down with screws there. If it gets scratched up it will be easy to peel off with the aid of some solvent.
I guess that no planer manufacturer's do this it is not a great solution.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Top
User avatar
JPG
Platinum Member
Posts: 35430
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: Glue to attach Planer Stainless Steel Clad to Aluminum Casting

Post by JPG »

jsburger wrote: ↑Mon Sep 23, 2024 7:54 pm
edma194 wrote: ↑Mon Sep 23, 2024 1:39 pm HDPE would be a great surface for the planer bed. Very slippery. But also very difficult to glue it to the aluminum casting ;)

Actually silicone would work very well to hold it down. It can be thinned to spread a light coat. If it can be wrapped over the ends of the casting it could be held down with screws there. If it gets scratched up it will be easy to peel off with the aid of some solvent.
I guess that no planer manufacturer's do this it is not a great solution.
It may be too 'non-rigid". Oughta feed easy though.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
clemensk
Silver Member
Posts: 16
Joined: Wed Aug 14, 2024 1:47 pm

Re: Glue to attach Planer Stainless Steel Clad to Aluminum Casting

Post by clemensk »

I finally finished this task. I used the 77 glue. Tacky enough and still easy to position. I did 3d print a press due to bend the aluminum sheet. It looks okay. But I have the feeling the aluminum table itself is not 100% even. But it’s minimal and I don’t think it will hinder me to create plane enough boards.
Attachments
IMG_9528.jpeg
IMG_9528.jpeg (495.46 KiB) Viewed 834 times
IMG_9529.jpeg
IMG_9529.jpeg (477.52 KiB) Viewed 834 times
IMG_9530.jpeg
IMG_9530.jpeg (429.31 KiB) Viewed 834 times
Top
Matanuska
Gold Member
Posts: 206
Joined: Sun Jan 02, 2022 8:07 pm
Location: Dallas, Texas

Re: Glue to attach Planer Stainless Steel Clad to Aluminum Casting

Post by Matanuska »

Looks nice, but wondering why it would be necessary to do this. Not possible to clean, polish, and wax the aluminum table to achieve a low friction surface?
- Matanuska

1984 Mark V upgraded to 520 PowerPro. Shopsmith cast iron table bandsaw, jointer, belt sander, and 60's vintage 610 jigsaw SPT's. Makita 2040 15" planer, JessEm Mast-R-Lift II router table.
Top
User avatar
jsburger
Platinum Member
Posts: 6551
Joined: Fri Jul 21, 2006 4:06 pm
Location: Hooper, UT

Re: Glue to attach Planer Stainless Steel Clad to Aluminum Casting

Post by jsburger »

Matanuska wrote: ↑Tue Oct 22, 2024 6:13 pm Looks nice, but wondering why it would be necessary to do this. Not possible to clean, polish, and wax the aluminum table to achieve a low friction surface?
Because that is the way the OEM aluminum table on the MK mount planer was constructed. The non MK mount Pro Planer has a cast iron table. To save weight the MK mount planer has an aluminum table and is skinned with stainless steel for durability.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Top
Matanuska
Gold Member
Posts: 206
Joined: Sun Jan 02, 2022 8:07 pm
Location: Dallas, Texas

Re: Glue to attach Planer Stainless Steel Clad to Aluminum Casting

Post by Matanuska »

I wasn’t aware the MK version had a SS skin. I wonder what happened to the original skin that required a replacement.
- Matanuska

1984 Mark V upgraded to 520 PowerPro. Shopsmith cast iron table bandsaw, jointer, belt sander, and 60's vintage 610 jigsaw SPT's. Makita 2040 15" planer, JessEm Mast-R-Lift II router table.
Top
Post Reply

Return to “Maintenance and Repair”