Hi all,
I just completed my new miter saw station and thought others looking to make their sliding miter saw more versatile, mobile, reduce saw dust and etc. I wrestled with what I wanted in a mobile station off and on for a couple of years. I ran across plans for a station in the "Fine WoodWorking Tools and Shops" magazine that fit the bill. The issue is winter 2009. About the only thing I changed was to reduce the cabinet height by 1 in. It has a shop vac installed in the cabinet and locking swivel casters got from Woodcraft. The saw and vac are connected to an outlet that activates the vac when I pull the trigger on my saw. I have a Makita 10" slider mounted on the stand. My shop is only 16 x 24 so space is a little tight.
Jack
520 PowerPro, SM bandsaw, Powerstation, Dewalt 735 planer, Festool TS55, CT22 vac and RO125,
Mobile miter saw station completed
Moderator: admin
Mobile miter saw station completed
- Attachments
-
- P1040124.JPG (121.47 KiB) Viewed 9040 times
-
- P1040125.JPG (120.92 KiB) Viewed 8924 times
-
- P1040126.JPG (118.04 KiB) Viewed 8889 times
-
wlhayesmfs
- Platinum Member
- Posts: 667
- Joined: Fri Jul 21, 2006 10:50 am
- Location: Broken Arrow OK
-
robinson46176
- Platinum Member
- Posts: 4182
- Joined: Mon Mar 09, 2009 9:00 pm
- Location: Central Indiana (Shelbyville)
That looks useful, practical and attractive...
.
.
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
-
bobgroh
- Gold Member
- Posts: 400
- Joined: Sun Jun 29, 2008 1:12 pm
- Location: Just east of Kansas City, Missouri
That is exactly the one that I saw on the FW'ing web site (my wife purchased me a subscription for the web version for Christmas). Very nice job!
Haven't built mine yet but I am planning to soon (I always say that!). I did see one change I might make and that is to have the 'arms' on the side slide out rather than be hinged. Still pondering that change to the design. Going to use the same basic box design (with drawers) for a roll around stand for my router table.
Haven't built mine yet but I am planning to soon (I always say that!). I did see one change I might make and that is to have the 'arms' on the side slide out rather than be hinged. Still pondering that change to the design. Going to use the same basic box design (with drawers) for a roll around stand for my router table.
Bob Groh
Blue Springs, Missouri (just east of Kansas City, MO)
--------------------------------------------
1984 SS Mark V updated to model 510
1994 SS Mark V updated to model 520
SS SPT's: Bandsaw
Other tools:routers, Bosch router table, Craftsman 6" jointer, Steel City 12" bench planer, Porter Cable 7" power saw, and too much other stuff (not really - just kidding!!)
Blue Springs, Missouri (just east of Kansas City, MO)
--------------------------------------------
1984 SS Mark V updated to model 510
1994 SS Mark V updated to model 520
SS SPT's: Bandsaw
Other tools:routers, Bosch router table, Craftsman 6" jointer, Steel City 12" bench planer, Porter Cable 7" power saw, and too much other stuff (not really - just kidding!!)
Miter saw station
Bob,bobgroh wrote:That is exactly the one that I saw on the FW'ing web site (my wife purchased me a subscription for the web version for Christmas). Very nice job!
Haven't built mine yet but I am planning to soon (I always say that!). I did see one change I might make and that is to have the 'arms' on the side slide out rather than be hinged. Still pondering that change to the design. Going to use the same basic box design (with drawers) for a roll around stand for my router table.
I studied the plans and thought this through for close to 2 years (I have a real job that takes me out of town a lot) but there is nothing like making the first cuts and moving forward. I really enjoyed the process of bulding the station and have found it to be very functional. In talking about the "arms" the plans called for 2 strap hinges but I didn't think that would be adequate so I used piano hinges. The wings extended with support arms in place are rock solid.
Thanks guys and gals for all the kind comments!
Charlese, are you still experiencing the radio frequency interference with your PowerPro?
Jack
