Shopsmith Forums

I will do the "C" slot.

Hi,

Looks like we have run out of volunteers after this week. It looks like I can do the next section "D" which is 5/31, 6/7, 6/14, and 6/21.

This leaves section "E" (which I will not be here for most of), so we could really use someone to sign up for that period.

Anyone, anyone at all???

Ed

Far be it from me to try to shame anyone into taking a minor leadership role in this Forum.

You guys should really go back and peruse the first few pages of this thread and see all those who thought this was the best idea since sliced bread. Surely one of those folks would step up take the Host spot for some of this book!

reible wrote:Hi,

Looks like we have run out of volunteers after this week. It looks like I can do the next section "D" which is 5/31, 6/7, 6/14, and 6/21.

This leaves section "E" (which I will not be here for most of), so we could really use someone to sign up for that period.

Anyone, anyone at all???

Ed

I originally agreed to 'host' for four weeks. I will finish up next Sunday with Chapter 18 Drum Sanding. My repeated 'call' for a volunteer was due to 'no response'. WHERE ARE YOU????! Like Chuck said, where is all that early enthusium???

I reckon I can host the Weeks of June 29, July 6, 13 and 20. After that, I will be back at school pretty much daily. PM me if there is anything more than getting folks started and opening a thread to house the comments.

jimthej wrote:I reckon I can host the Weeks of June 29, July 6, 13 and 20. After that, I will be back at school pretty much daily. PM me if there is anything more than getting folks started and opening a thread to house the comments.

That's all, other than to monitor it for any one's 'need'. The only 'trickey part' is in creating the 'hyperlink' to the proper chapter. If you do not know how, HOLLER!!(ask and it shall be conveyed to you).

YEAH! Thanks, Jim!:D

Hi Jim and all,

Just a reminder that you Jim have volunteered to host the remaining 4 chapters in our reading through the online PTWFE project.

I want to personally thank those that have volunteered to host we have all benefited from your efforts.

For those still with us in the reading, great job!

For those that have fallen a bit behind, don't give up, just keep reading at your own pace and finish the task.

For anyone new or now just getting the time to start that is fine. The posts are all here and still open to discussion, comments, or questions. If you want to learn there are a lot of users here more then willing to help.

For anyone who might have just purchased a planner now would be a good time to check out:
https://forum.shopsmith.com/viewtopic.php?t=3815
we have just started the chapter for them.

Ed

jimthej wrote:I reckon I can host the Weeks of June 29, July 6, 13 and 20. After that, I will be back at school pretty much daily. PM me if there is anything more than getting folks started and opening a thread to house the comments.

I don't know about others but since the Beginning Woodworking section of this forum does not have any sub-sections to post to I thought it would be nice to have a simple index for the Power Tool Woodworking for Everyone (PTWFE) Club Reading posts that are being put together on this forum.

I will place the title and a link to each of the PTWFE posts for each chapter of the book. That will make it easier for everyone to find a particular chapter much quicker than searching or wading through the many posts.

So, here goes the first few. I will add to them as they are posted and as I have the time to do so. There may be some delays as I too travel occassionally and won't be able to kept this updated in a real-time manner.

NOTE: Each listing will have two links (where applicable). The first will be to the specific post in this forum on that subject and the second will be to the Shopsmith website for that chapter in the PTWFE book itself.

Reading through the PTWFE Club - 02/06/2009
This was reible's (Ed) intro post on the subject:
https://forum.shopsmith.com/viewtopic.php?t=2985
http://www.shopsmith.com/academy/welcome.htm

PTWFE Books question - 02/08/2009
What editions of the PTWFE exist?
https://forum.shopsmith.com/viewtopic.php?t=2998

PTWFE Chapter 1 - Introduction - 02/08/2009
https://forum.shopsmith.com/viewtopic.php?t=2997
http://www.shopsmith.com/academy/introduction.htm

PTWFE Chapter 2 - Table Saw: Basic Cuts - 02/18/2009
https://forum.shopsmith.com/viewtopic.php?t=3058
http://www.shopsmith.com/academy/tblsaw_basiccuts/index.htm

PTWFE Chapter 3 - Table Saw: Joinery - 02/22/2009
https://forum.shopsmith.com/viewtopic.php?t=3079
http://www.shopsmith.com/academy/tblsaw_joinery/index.htm

PTWFE Chapter 4 - Table Saw: Special Operations - 03/01/2009
https://forum.shopsmith.com/viewtopic.php?t=3112
http://www.shopsmith.com/academy/tblsaw_spops/index.htm

PTWFE Chapter 5 - Table Saw: Molding - 03/09/2009
https://forum.shopsmith.com/viewtopic.php?t=3161
http://www.shopsmith.com/academy/tblsaw_molding/index.htm

PTWFE Chapter 6 - Jointer - 03/15/2009
https://forum.shopsmith.com/viewtopic.php?t=3195
http://www.shopsmith.com/academy/jointers/index.htm

PTWFE Chapter 7 - Drill Press - 03/22/2009
https://forum.shopsmith.com/viewtopic.php?t=3246
http://www.shopsmith.com/academy/drillpress/index.htm

PTWFE Chapter 8 - Mortising & Tenonning - 03/29/2009
https://forum.shopsmith.com/viewtopic.php?t=3303
http://www.shopsmith.com/academy/mortistenon/index.htm

PTWFE Chapter 9 - Shaping - 04/05/2009
https://forum.shopsmith.com/viewtopic.php?t=3341
http://www.shopsmith.com/academy/shaping/index.htm

PTWFE Chapter 10 - Routing - 04/12/2009
https://forum.shopsmith.com/viewtopic.php?t=3385
http://www.shopsmith.com/academy/routing/index.htm

PTWFE Chapter 11 - Horizontal Boring & Doweling - 04/19/2009
https://forum.shopsmith.com/viewtopic.php?t=3427
http://www.shopsmith.com/academy/horzbordowel/index.htm

PTWFE Chapter 12 - Lathe Turning - 04/26/2009
https://forum.shopsmith.com/viewtopic.php?t=3479
http://www.shopsmith.com/academy/latheturning/index.htm

PTWFE Chapter 13 - Lathe Duplication - 05/02/2009
https://forum.shopsmith.com/viewtopic.php?t=3528
http://www.shopsmith.com/academy/lathedup/index.htm

PTWFE Chapter 14 - Bandsaw - 05/10/2009
https://forum.shopsmith.com/viewtopic.php?t=3576
http://www.shopsmith.com/academy/bandsaw/index.htm

PTWFE Chapter 15 - Scroll Saw - 05/17/2009
https://forum.shopsmith.com/viewtopic.php?t=3610
http://www.shopsmith.com/academy/scrollsaw/index.htm

PTWFE Chapter 16 - Jigsaw -
No on-line reference available

PTWFE Chapter 17 - Disc Sander - 05/24/2009
https://forum.shopsmith.com/viewtopic.php?t=3655
http://www.shopsmith.com/academy/discsand/index.htm

PTWFE Chapter 18 - Drum Sanding - 05/31/2009
https://forum.shopsmith.com/viewtopic.php?t=3686
http://www.shopsmith.com/academy/drumsand/index.htm

PTWFE Chapter 19 - Belt Sander - 06/07/2009
https://forum.shopsmith.com/viewtopic.php?t=3731
http://www.shopsmith.com/academy/beltsand/index.htm

PTWFE Chapter 20 - Strip Sander - 06/14/2009
https://forum.shopsmith.com/viewtopic.php?t=3774
http://www.shopsmith.com/academy/stripsand/index.htm

PTWFE Chapter 21 - Thickness Planers - 06/20/2009
https://forum.shopsmith.com/viewtopic.php?t=3815
http://www.shopsmith.com/academy/planing/index.htm

PTWFE Chapter 22 - Routing System -



PTWFE Chapter 23 - Biscuit Joiner -



PTWFE Chapter 24 - Sharpening -



PTWFE Chapter 25 - Dust Collector -